Water Proof Large Through Bore Slip Rings

● ID 80mm OD 160mm
● IP 65 or higher
● For Feeris wheel, port Crane, mining driling, etc..
Send Inquiry
Description

The water proof large through bore slip rings are used in various outdoor and high-humidity industrial environments. They achieve an IP65 waterproof rating, utilizing a multi-layer sealing structure and corrosion-resistant components to prevent moisture and salt spray corrosion. Additionally, their large through-bore hollow shaft allows for quick cable routing, especially in port cranes, mining drills, and Ferris wheels.

 

 

Features

 

Rugged Construction

The shell of the water proof large through bore slip rings is made of high-strength aluminum alloy or stainless steel and is made by die-casting. Under normal working conditions, its tensile strength reaches 200MPa, can withstand large external impact.

High conductivity

Its conductive ring is made of copper alloy, the thickness is generally between 2mm and 5mm. The slip ring has a conductivity of more than 20% IACS when in use, for fast current and signals transmittion.

Easy to install

The through hole slip ring adopts a central through-hole design, can be directly sleeved on the rotating shaft of the equipment for connection. Or we can install it to the machines through flange mounting, threaded connection and other installation methods.

 

 

 

Products Description

 

 

Power and signal paths around a central opening

The ByTune BTH80160 is a through bore slip ring with an 80mm inner diameter and a 160mm outer diameter. It transfers electrical power and signals between stationary and rotating parts while leaving the centre available for a shaft or service routing. Precious metal contacts form the rotating electrical interface.

The configuration can be selected around the electrical load, the number of paths and exposure to water or dust. This allows the electrical connection to be planned alongside the equipment shaft, surrounding enclosure and cable arrangement.

BTH80160

BTH80160 product detail with central opening and lead exit.
1
Outline drawing; body length L follows the circuit configuration.

 

Check the complete assembly envelope

The outline identifies the rotor and stator, lead exits and anti-rotation tab. Allow clearance for that tab and for the cable bends as well as the cylindrical body. A central passage for a pipe does not itself provide a rotating fluid connection.

 

Discuss Your 80mm Bore Installation

 

 

 

Choose protection for the exposure

 

 

IP54, IP65 and IP68 configurations

BTH80160 is available with IP54, IP65 and IP68 protection options. Select the required configuration for the actual location of the rotating joint: inside a protective enclosure, exposed to rain or cleaning water, or subject to a defined immersion requirement.

For an IP68 requirement, the depth, duration and operating conditions need to be defined for the selected assembly. An immersion rating alone does not establish suitability for every type of water jet or for saltwater corrosion.

Include cable entries and the surrounding equipment

ByTune can review the protection requirement together with the housing arrangement, lead exits and connections. Describe the water exposure, dust, temperature, contaminants and cleaning method so the sealing and connection layout can be evaluated as one assembly. For coastal equipment, include the corrosion and salt exposure requirements separately.

 

 

Match body length to circuit current

 

 

Choose the current group before reserving axial space

At the same circuit count, the 10A–20A group requires a longer body than the 5A group. The table gives the length relationships and the 6, 12 and 18 circuit examples. N is the number of rings; L is in millimetres.

For a mixed power and signal arrangement, ByTune can review the circuit allocation and issue the corresponding assembly dimensions. Leave additional room for lead routing and the mounting hardware outside the body length.

 

Current group Length L (mm) 6 circuits 12 circuits 18 circuits
5A 34.8 + 3.3 × N 54.6 mm 74.4 mm 94.2 mm
10A–20A 34.8 + 4.8 × N 63.6 mm 92.4 mm 121.2 mm

 

Request a Circuit Layout and Drawing

 

 

Electrical and mechanical options

 

 

Parameter BTH80160 configuration
Bore / outer diameter 80mm / 160mm
Circuit counts 6, 12, 18, 24, 36, 48, 64
Current options 5A, 10A, 15A, 20A
Voltage ≤380V; 600V optional
Working speed 500 rpm
Operating temperature −40°C to +100°C
Contact material Precious metal
Protection options IP54, IP65, IP68
Dielectric strength ≥1,000V at 50Hz between circuits
Insulation resistance 1,000MΩ at 500VDC
Lead wire sizes 22 AWG, 17 AWG, 14 AWG
Lead construction Coloured PTFE insulation; silver- or tin-plated conductor
Lead length 200 mm

 

Build the rating around the individual circuits

Specify the normal and peak current on each power path, together with its voltage and return path. Allocate separate paths for the required control or sensor connections. A circuit count is a count of electrical paths, so it must include the complete wiring arrangement.

The dielectric and insulation resistance figures describe insulation tests, rather than an additional operating voltage allowance. Signal interfaces also need their own cable, shielding and performance requirements; the power circuit rating does not establish data protocol compatibility. The lead size and termination are selected with the circuit arrangement.

 

 

Define the rotating interface in your equipment

 

 

Port cranes and mining drills

For a crane slew interface or a rotating section of a drilling machine, identify which power, control and monitoring paths cross the joint. Check those loads against the selected electrical configuration, and assess the available space around the shaft, the restraints and the connection points.

Outdoor exposure and contamination can vary substantially between the protected interior of a machine and an exposed rotating assembly. Include rain, washdown, drilling dust and any corrosive atmosphere in the configuration review.

Rotating amusement equipment and replacement assemblies

For a Ferris wheel or another rotating amusement assembly, define the electrical function at the rotating connection and the applicable equipment requirements. Select the slip ring for those paths and loads; equipment safety and control functions need their own system assessment.

For a replacement, compare the existing drawing, bore fit, mounting, circuit schedule, cable exits and connections. Matching the 80mm bore alone does not establish interchangeability. For other installation sizes, compare BTH60130, BTH120210 or the through hole slip ring range.

 

 

Get a configured BTH80160 quotation

 

 

Engineering inputs for the quotation

Send the installation drawing, required circuit count, current and voltage on each path, signal interface, speed and duty cycle. Add the protection requirement, exposure conditions, lead or connector arrangement and available axial space. ByTune provides mechanical and electrical design support to evaluate these requirements and develop the configuration.

Include the sample or production quantity, required delivery date and any replacement part reference. Pricing and delivery are confirmed for the selected configuration and order quantity.

Inspection and documentation

Inspection planning can cover dimensions, continuity, insulation and rotation, together with application-specific signal or environmental checks. State the acceptance criteria and any required compliance documents when requesting the quotation so the documentation and test scope can be agreed. See ByTune quality control and testing for the manufacturing inspection process.

Request Your BTH80160 Configuration

 

FAQ

 

Q: How do you ensure the quality of your through-hole slip rings?

A: As a professional through-hole slip ring manufacturer, ByTune attaches great importance to product quality. Our production process fully complies with ISO standards and we conduct product sampling at different stages. These tests include wear resistance test, signal transmission test, etc.

Q: Can your products be customized?

A: Of course! Our R&D team has rich experience in product innovation and can design and produce products according to your specified requirements. Whether it is size, material, performance or other aspects.

Q: Can you deliver on time?

A: Please rest assured that our company has strong production capacity and supply chain. For standard products, samples are delivered in 3-5 days, while batch products are delivered within 1-2 weeks. We have sufficient supply of raw materials and cost control. Even in the case of large-volume orders, high-quality products can be delivered on time.

 

Hot Tags: BTH80160 through bore slip ring, 80mm bore slip ring, 160mm OD slip ring, IP65 through bore slip ring, 20A through bore slip ring, BTH80160 dimensions, Through Hole Slip Ring With Flexible Dimension, Small Inner Hole Slip Ring, waterproof through bore slip rings, Through Bore Slip Ring With Specified Dimension, ISDN And Ethernet Slip Ring For Military Application, Compact Standard Through Hole Slip Ring

Your Trustworthy Slip Ring Manufacturer

Please share the details of your slip ring requirements with us, our slip ring experts will promptly evaluate your needs and provide you with tailored solutions.

Get in Touch with ByTune

We are always ready to help. Contact us via phone, email, or fill in the request form below to get an extensive consultation from our expert team.