The large separate slip ring with gold contact is mainly customized for the French market, with an inner hole size of 445mm. It is widely used in rotary equipment on industrial production lines, such as rotary tables, manipulators, etc. Engineered with 18 gold-contact channels and 1000 RPM max speed, this slip ring transmits stable and precise multi-signals and data.
Features
Modular Configuration
The large separate slip ring with gold contact adopts a modular structure design, consisting of independently assembled slip rings and brushes. Its configuration can be customized according to the device, whether it is a single signal or multiple channels.
Low Resistivity
The slip ring adopts a gold-to-gold contact design, with increased number of contact points between the brush and the conductive ring. This improves the efficiency of current transmission and reduce contact resistance.
Wear-Resistant
The surface of its conductive ring and brush is ground, polished, and plated with conductive precious metals or lubricating films. As a result, their friction coefficient is reduced to below 0.1, and they can run longer.
Drawing
|
Slip ring dimension: |
inner hole and outer diameter |
|
Channels: |
2 channels to 200 channels |
|
Loading of each channel: |
transfer signal or power, typically, it is 2A ,5A, 10A ,30A is most normal, |
|
Contacting material: |
Gold, Silver, Copper, Carbon Brush (for higher power |
|
Rotating speed: |
20 rpm ~ 5000rpm |
|
Brush holder: |
PCB,or POM ,dimension as specified |
|
Connecting wires of both sides: |
22 AWG, 20AWG, 16 AWG …. UL wires |
FAQ
Hot Tags: Large Separate Slip Ring With Gold Contact, China Large Separate Slip Ring With Gold Contact manufacturers, suppliers, factory, large separate slip ring, Modular Slip Ring With Flexible Dimension, multi channels separate slip rings, Reliable Split Slip Ring, Slip Ring With Separate Silver Rotor And PCB Stator, Standard Gold Contacting Separate Slip Ring
