Name: China PCB Brush Holder Separate Slip Ring Manufacturers Suppliers Factory - ByTune Electronics
Brand: ByTune
SKU: 248934855

The PCB brush holder separate slip ring is designed for wind power generation, Ferris wheels, drillers, etc. It has a diameter of 35mm, can be quickly integrated into space-limited equipment with its separate structure. This slip ring also delivers stable power and data signals with its silver brushes.

Features

Flexible structure

The PCB brush holder separate slip ring supports modular assembly. Due to its split design, its individual components can be modularly assembled into various configurations to adapt to different equipment structures.

Low contact resistance

The brushes of this slip ring adopt gold-to-gold contact design. It can stably transmit current and data signals, reducing signal attenuation and distortion.

Multi-signal compatibility

It is compatible with a variety of digital communication protocol signals, including RS232, RS485, CAN bus and other common signals.

Easy to install

The rotor and stator of this slip ring can be installed separately. When the slip ring fails, we can check and replace individual components.

Drawing

slip ring with PCB dimension

Mechanical requirement

OD	36mm
Working speed	500rpm
Operating temperature	-40℃~ +80℃
Contact material	gold & silver
IP Grade	/
Housing material	/

Electrical requirement

Circuit	9 channles for signal and 7 for power
Current	5A,
Voltage	≤380V,600V optional
Dielectric strength	≥1000V@50Hz between each circuit
Insulation resistance	1000MΩ@ 500VDC
Electric noise	≤7mΩ
Lead wire size	22AWG,
Lead wire length	300mm or as your requirements

Below parameters are optional for you

Dimension: Outer diameter and length , with or without an inner hole
With or without a housing
How many channels
What is the power or signal of each channel
Installation interface
Wire gauge and wire length
Working environment: temperature, rotating speed, IP grade ( if enclosed model )

FAQ

Q: Why should we use this slip ring?

A: The purpose of using slip rings is to transmit electrical signals when mechanical parts rotate continuously 360° without restriction. It also simplifies wiring in equipment systems and prevents failures caused by wire entanglement.

Q: What are the common failures of slip rings and what are their causes?

A: Common faults of slip rings include contact surface wear, insulation layer damage, loose fit, overheating, etc. The causes of these faults may include poor contact of contacts, aging of the insulation layer, shrinkage and deformation of materials, etc.

Q: What signals can ByTune's slip rings transmit? Is it multi-signal compatible?

A: Yes, it is compatible with a very wide range of signals. These signals mainly include USB, CC-link, Device-net, CAN-bus, Gigabit Ethernet, RS232, RS485, thermocouples, servos, HDMI, video, etc.

Hot Tags: PCB Brush Holder Separate Slip Ring, China PCB Brush Holder Separate Slip Ring manufacturers, suppliers, factory, Slip Ring With Separate Silver Rotor And PCB Stator, Reliable Split Slip Ring, Separate Slip Ring With Gold Rings, Multi-channels Separate Slip Rings, Separate Slip Ring With Flexible Dimension, mini separate slip ring