Miniature Slip Ring With Through Bore

● ID 10mm, OD 24mm, 2A
● Power or signal, miniature inner hole
● For medical equipments, intelligent hardware, etc...

Send Inquiry

The miniature slip ring with through bore is a small slip ring with an inner hole of 10mm. With small size and light weight, it's suitable for equipment requiring smooth rotation in tight spaces. This includes the medical equipment, intelligent hardware, etc. Also, the slip ring supports 2A current for power or signal transmission, with a maximum speed of 300 rpm.

Features

Reliable Quality

The miniature slip ring with through bore complies with RoHS, CE, FCC, and other certification standards, with stable bandwidth, signal attenuation, electrical transmission level, etc.

Easy to install

The slip ring is compact in structure, and designed with standardized interface. The interface complies with ISO standards or common sizes, so it can be installed with various equipment by bolting, flanges, etc.

Smooth conduction

Its conductive rings and brushes are made of highly conductive precious metals, copper, graphite and other materials. They fit relatively tightly and have sufficient contact area to enable the current to be transmitted stably.

Stable operation

The brushes inside the slip ring are connected to the brush holder using elastic buffer components, such as small springs or rubber pads. These components can absorb external vibrations and reduce the impact on the slip ring.

Slip Ring Design Drawings

Parameters

Mechanical:

Working speed	300rpm
Operating temperature	-40℃~ +100℃
Contact material	Precious metal
IP Grade	IP 54

Electrical:

Circuit	≤24
Current	2A
Voltage	≤380V
Dielectric strength	≥5 00V@50Hz between each circuit
Insulation resistance	500MΩ@ 500VDC
Electric noise	≤7mΩ
Lead wire size	28AWG, UL, color Teflon, silver or tin plated
Lead wire length	200mm
Life-span	120,000,000rounds

TYPE	Rings	Length	ID	OD
BHT1024-8	8	28.4mm	Φ 10mm	Φ 24 mm
BHT1024-12	12	35.6mm	Φ 10mm	Φ 24 mm
BHT1024-18	18	46.4mm	Φ 10mm	Φ 24 mm
BHT1024-24	24	57.2mm	Φ 10mm	Φ 24 mm

FAQ

Q: How to choose a through-hole slip ring for my device?

A: Consider whether the inner and outer diameters of the slip ring match the installation space, whether the number of circuits meets the signal and power transmission requirements, whether the speed requirements can be achieved, the working environment temperature and protection level, etc. For example, if the device has a large working current, you need to choose a slip ring with a higher rated current.

Q: Are your through-hole slip rings customizable?

A: Yes, the channel and load and body length of our slip rings are optional! The standard inner hole can be from 3mm to 300mm. If you have any further details, you can also contact sales@btslipring.com at any time.

Q: What should I pay attention to when maintaining this slip ring?

A: Check whether the contact of the slip ring is in good working state to see whether there is wear, corrosion or dust accumulation. At the same time, pay attention to check whether the cable connection is firm. and most important to keep sure each cable is not overloaded . and the working environment need to be within specified .

Hot Tags: Miniature Slip Ring With Through Bore, China Miniature Slip Ring With Through Bore manufacturers, suppliers, factory, Through Hole Slip Ring For Satellite Antenna, Through Hole Slip Ring With Connectors, waterproof through bore slip rings, High Speed Standard Through Hole Slip Ring, Small Through Hole Slip Ring, Gigabit Ethernet Through Hole Slip Ring